湖北电脑双柱拉力试验机
所属行业 | 物理测量仪 |
厂家/商户所在地 | 湖北-武汉 |
公司名 | 武汉市蔡甸区华威检测设备经营部 |
主营产品 | 高温老化房,恒温恒湿试验箱,高低温试验箱,紫外老化试验箱 |
查看其它工厂 [测试设备] 类似产品 查看其它工厂 [物理测量仪] 类似产品 |
更多该厂家湖北电脑双柱拉力试验机类似产品
一、湖北电脑双柱拉力试验机用途
本机是一款**适用黑色金属、有色金属、合金材料、铸钢铸铁、不锈钢、橡胶、塑料、纺织物、土工布、防水材料、电线电缆、网绳、预应力钢丝、玻璃纤维、木材、**器械、汽车构件、公路交通等材料的拉伸、压缩与弯曲试验,增加附具可做剪切、撕裂、剥离等试验。
二、原理
1.拉伸试验:试样一端夹于下夹具,试样一端夹于上夹具,本机连用马达传动螺杆而使移动横梁向上移动,因而将试样进行拉伸,结果连用力量传感器连接显示器自动显示拉力值;
2.压缩试验:试样放置于下夹具中间位置,本机连用马达传动螺杆而使移动横梁向下移动,因而将试样进行压缩,结果连用力量传感器连接显示器自动显示压力值;
二、湖北电脑双柱拉力试验机执行标准
1**/T16491-2008 电子式试验机
2**/T1040-2006 塑料拉伸性能试验方法
3**/T8804-2003 热塑性塑料管材拉伸性能测定
4**/T1041-2008 塑料压缩性能的测定方法
5**/T9341-2008 塑料 弯曲性能的测定
三、湖北电脑双柱拉力试验机主要技术参数
1.测量范围:10KN
2.力量单位:N、gf、lbf、kgf、kN、mg、T、oz、cwt、dr
3.强度单位:Kpa、Mpa等
4.分辨率:0.1 N
5.示值精度:±1 %
6.试验速度:300.0 mm/min(500.0 mm/min以内可调)
7.回程速度:400.0 mm/min(500.0 mm/min以内可调)
8.机台行程:700 mm
四、仪器正常工作的环境要求
1.室温:23℃±10℃
2.电源:AC220V±22V,(50~60)HZ,电流10A,电源应**接地。
3.工作环境清洁,无强磁场和震动源,工作台平整稳固。
4.相对湿度:<85%
- 联 系 人:孙巍 先生
- 工作 QQ :499209451
- 电 话: 查看完整电话
- 手 机: 查看完整电话
- 网 址:http://www.huawei17.com
- 地 址:中国 湖北 武汉 武汉市江夏区阳光中路博天环保科技园