风冷涡旋式冷水机,激光冷水机厂家
所属行业 | 电话 |
厂家/商户所在地 | 北京-北京 |
公司名 | 北京利德盛机械有限公司 |
主营产品 | 压铸油加热器,工业油温机,工业冷水机,螺杆式冷水机组 |
查看其它工厂 [橡胶制品加工机械及部件] 类似产品 查看其它工厂 [轴承座] 类似产品 查看其它工厂 [电话] 类似产品 |
更多该厂家风冷涡旋式冷水机,激光冷水机厂家类似产品
激光冷水机介绍:
激光冷水机实际是冷水机在激光行业市场另一**应用,它是通过压缩机压缩**利昂,然后到冷凝器进行热量交换,再到蒸发器进行放热,后回到压缩机的过程,利用这种循环达到制冷效果。
激光冷水机选型计算:
1.制冷量 a.顾名思义为冷却系统的实际制冷能力,是激光器冷却设备选择的个指标。 b.一般我们可以根据激光器的光电转换效率来计算出激光器的发热量,再来选择。 P热 = P 激光 / μ 假设玻璃管CO2激光器的热效率μ一般为15%,80W的激光器则少需要:80/0.15 = 533W 也就是说在产生80W激光的同时,激光器注入533W的能量,无效能量需要水冷机带走。 c.有些时候我们,我们直接根据激光电源的输入额定功率减去激光器的输出功率来确定激光冷水机的制冷量。比如我们常用的射频激光器和固体激光器都会标明额定满功率的电源电压和电流,以相干70W射频激光器为例,其要求电源输入48V2**,瞬时36A,可以计算输入功率1200W。
2.温控精度 这个指标**来自激光器的要求,对于半导体激光器来讲必须温控精度±0.1℃,这就要求压缩机预知温度变化规律,自适应负载的变化,一般用集成温控模块的 水冷机都不可能做到这一点。当然对CO2激光器来讲温度要求±2℃到±5℃,市面上大多数**水冷机都可以做到。
3.热效率和水容积 以上连个概念就引出了水冷机热效率和水容积的概念,也就是压缩机的工作控制方式和水箱大小两个指标。一般水箱越大越好,但在设计上不同的压缩机控制方式会 有很大不同。这就是同样的压缩机制冷量和水容积,带有PID反馈功能的运转控制方式会大大提高整体系统的制冷能力。
北京利德盛机械有限公司售后服务**:
1、 所有由我公司提供的设备保修壹年(消耗件除外),在保修期内,因设备本身不良引起的问题,我公司负责免费维修。
2、 一旦合同订立,客户订单发出,即进入无期限售后服务期。我们将**及时提供客户所要订购的零配件及提供客户所需要的各类服务,有义务、有责任回答客户任何时候提出的任何问题。
3、 我公司负责客户的培训工作,且终身技术支持。
4、 走在故障发生的前面,确保我公司售出的任何一台设备无故障运行。
5、 使每一个客户对我们满意,使客户对我们每一次服务满意。
6、 订单发出后,即应建立与客户的联系,同时我公司时刻注意客户系统布置、气路、水路、电路等有无问题及工程进度,以便及时为客户开机调试。**ldszl**
- 联 系 人:张红 先生
- 工作 QQ :380529505
- 电 话: 查看完整电话
- 手 机: 查看完整电话
- 网 址:http://www.gzmwj.com
- 地 址:中国 北京 北京 北京