供应PA6塑胶原料,尼龙30%玻纤增强
所属行业 | LLDPE |
厂家/商户所在地 | 广东-东莞 |
公司名 | 东莞市广进塑胶原料有限公司公司 |
主营产品 | PMMA塑胶原料,EVA塑胶原料,PTFE塑胶原料,PEEK塑胶原料 |
查看其它工厂 [PA] 类似产品 查看其它工厂 [塑料原料] 类似产品 |
更多该厂家供应PA6塑胶原料,尼龙30%玻纤增强类似产品
①原料描述部分 规格级别 玻纤增强 外观颜色
该料用途 适合于电镀
备注说明 30%玻纤增强,弹性体改性,较**V通用品级有更高的缺口冲击强度,即使在干燥状态下,在某些特定情况下,可是省去后处理工艺。
②原料技术数据
性能项目 试验条件[状态] 测试方法 测试数据 数据单位
机械性能 CHARPY冲击强度 -30℃ ISO 179-1eU 80 kJ/m2
弯曲强度下的应变 2mm/min ISO 178 5.0(7.0) %
弯曲模量 2mm/min ISO 178 8000(4800) MPa
CHARPY缺口冲击强度 -30℃ ISO 179-1eA 10 kJ/m2
拉伸蠕变模量 1000h ISO 899-1 3300 MPa
CHARPY冲击强度 23℃ ISO 179-1eU 95(110) kJ/m2
3.5%应变下的弯曲应力 2mm/min ISO 178 230(115) MPa
拉伸强度 5mm/min ISO 527-1,-2 160(100) MPa
拉伸模量 1mm/min ISO 527-1,-2 9000(5200) MPa
拉伸蠕变模量 1h ISO 899-1 4200 MPa
弯曲强度 2mm/min ISO 178 250(145) MPa
总穿透能量3mm 23℃ ISO 6603-2 10(15) Nm
CHARPY缺口冲击强度 23℃ ISO 179-1eA 18(28) kJ/m2
IZOD冲击强度 -30℃ ISO 180-1A 10 kJ/m2
断裂延伸率 5mm/min ISO 527-1,-2 4.0(7.0) %
IZOD缺口冲击强度 23℃ ISO 180-1A 16(25) kJ/m2
球压痕硬度 ISO 2039-1 190(80) N/mm2
总穿透能量3mm -30℃ ISO 6603-2 7 Nm
电气性能 电解腐蚀 IEC 60426 A/B 2 Rating
相比漏电起痕指数CTI M 溶液B IEC 60112 525 M Rating
介电强度 IEC 60243-1 40 kV/mm
表面电阻率 IEC 60093 1015(1013) Ohm
体积电阻率 IEC 60093 1013(1010) Ohm.m
相对介电常数 100Hz IEC 60250 4.2(13)
损耗因子 1MHz IEC 60250 200(900) 10-4
相比漏电起痕指数CTI 溶液A IEC 60112 575 Rating
相对介电常数 1MHz IEC 60250 3.8(4.6)
损耗因子 100Hz IEC 60250 90(1750) 10-4
加工性能 模具温度 ISO 294 80 ℃
熔体温度 ISO 294 280 ℃
注射速度 ISO 294 200 mm/s
热性能 熔化温度 10K/min ISO 11357-1,-3 213 ℃
相对温度指数(拉伸强度) UL 746 B 130 ℃
半间距(拉伸冲击强度) IEC 60216-1 13.0 ℃
温度指数(介电强度) 5000h IEC 60216-1 170 ℃
辉光金属丝试验温度 2.0mm IEC 60695-2-12 650 ℃
半间距(介电强度) IEC 60216-1 9.3 ℃
维卡软化温度 50N;120K/h ISO 306 >200 ℃
氧指数 方法A-上表面点燃 ISO 4589-2 22 %
温度指数(拉伸强度) 20000h IEC 60216-1 145 ℃
线性热膨胀系数 流动方向 23 to 55℃ ISO 11359-1,2 0.2 10-4/K
温度指数(拉伸冲击强度) 20000h IEC 60216-1 105 ℃
线性热膨胀系数 垂直流向 23 to 55℃ ISO 11359-1,2 1.0 10-4/K
热变形温度-方法Af 1.80MPa ISO 75-1,-2 ~200 ℃
燃烧速率(US-FM**) 1mm ISO 3795 <55 mm/min
相对温度指数(介电强度) UL 746 B 130 ℃
可燃性试验UL94/厚度3.2mm UL 94 HB Class
半间距(拉伸强度) IEC 60216-1 11.7 ℃
可燃性试验UL94/厚度1.6mm UL 94 HB Class
热变形温度-方法Cf 8.00MPa ISO 75-1,-2 ~90 ℃
相对温度指数(拉伸冲击强度) UL 746 B 95 ℃
热变形温度-方法Bf 0.45MPa ISO 75-1,-2 ~210 ℃
温度指数(拉伸强度) 5000h IEC 60216-1 170 ℃
比热 1.1 kJ/(kg·K)
热传导系数 ISO 8302 0.3 W/(m·K)
温度指数(拉伸冲击强度) 5000h IEC 60216-1 135 ℃
温度指数(介电强度) 20000h IEC 60216-1 150 ℃
其它性能 吸水性(饱和值) 水,23℃ ISO 62 ~7
玻璃纤维/玻璃珠/填料含量 30
密度 ISO 1183 1.36 g/cm3
成型收缩率 流动方向 150×105×3;280℃/MT80℃;500bar based on ISO 2577 0.163) %
垂直流向 150×105×3;280℃/MT80℃;500bar based on ISO 2577 0.723) %
松散密度 ISO 60 ~0.7 g/cm3
熔融指数(体积) 260℃;2.16kg ISO 1133 11 cm3/10min
吸水性(平衡值) 23℃/50%相对湿度 ISO 62 ~2.0
后收缩 流动方向 150×105×3;120℃;4h based on ISO 2577 0.04 %
垂直流向 150×105×3;120℃;4h based on ISO 2577 0.15 %
**供应工程塑胶尼龙PA6部分型号:
(1)PA6 美国** PC、PDX-P-93058、PDX-P-93058、PF-100-12、PF-100-12、PX06011-WH**308BZDD、PX06011-WH**308BZDD、PF-100-10、PF-100-10、STATKON-PC-NAT、6 30V Z3/3/05、B28N-**1066、B28N-**1066、IFL36R-GN1E058、IFL36R-GN1E058;
(2)PA6 美国杜邦 73G30HSL **416、73**0 NC010 、73G30T **261、73G30T **261、73M30 NC010、FR10 **059、FR10 **059、FR10 NC010、FR10 NC010;
(3)PA6 美国舒尔曼 4603、GF30、GF30 **、GF45、GF30-60、MRGF25/15 42H-BXDX9;
(4)PA6 美国韦尔曼 MRGF25/15 42H-BXDX9、MRGF1616-**、GF30-60;
(5)PA6 美国EMS BGK-30 **、BRZ 334HS **;
(6)PA6 美国RTP 202A S 802194、299-AX68393;
(7)PA6 日本三菱工程 1013G43、1013GH30、1013GH30、1015G15、1015G15、1015G33、1015G33、1017GH33、1010C2、1013G**0 **37A、1013G**0 **37A、1015G30 **、1015G30 **、N-252-U22、1010F5、1010F5、1010GN2-15、1011**5、1011**5、1013GH15
(8)PA6 法国罗地亚 C216V30、C216V40、C218V30 **、C218V30 **、C246SI、C246SI、PSB205M、CV-15;
(9)PA6 上海罗地亚 1011H1、B50H1 、C216-V15、C216V30、C30HIV30;
(10)PA6 日本东丽 1011G-45、CM1001G-15、CM1001G-30、CM1001R、CM1011G-15、CM1011G-20、CM1011G-30 **、CM1011G-45、CM1011RG-02、CM1016G-15、CM1016G-15
(11)PA6 日本尤尼卡 A1030GF **、A1030GFL、A1030J、A1030J;
(12)PA6 日本宇部 1011GC6、1013IU50 **、1015GC3、1015GC6、1015GC650、1015GX78V
(13)PA6 德国拜耳 **V130、**V30H1.0、**V30H1.0 000000、B30S、B3G6;
(14)PA6 德国朗盛 B40SK、BG-30X **、**V140**.0 900051、B30S、BG30X、**V130。
本公司**供应各种工程塑胶原料,尼龙加玻纤价格优惠,**提供汽车配件,挡泥板,刹车件等产品。欢迎客户前来洽谈。顺颂商祺!
优点:1、具高抗张强度;2、耐韧、耐冲击性特优;3、自润性、**性佳、耐**品性优;4、低温特性佳;5、具自熄性;
典型应用范围: 同PA6相比,PA6/66更**应用于汽车工业、仪器壳体以及其它需要有抗冲击性和**度要求的产品。 电子电器:连接器、卷线轴、计时器、护盖断路器、开关壳座 汽车: 散热风扇、门把、油箱盖、进气隔栅、水箱护盖、灯座 工业零件:椅座、自行车输框、溜冰鞋底座、纺织梭、踏板、滑输
分类:防静电PA,导电PA,加纤防火PA,防火PA,抗紫外线耐候PA,高温挤出级PA。
本公司还供应上述产品的同类产品
- 联 系 人:刘小姐 女士
- 工作 QQ :269291624
- 电 话: 查看完整电话
- 手 机: 查看完整电话
- 网 址:http://wangsujiao.b2b.youboy.com/
- 地 址:中国 广东 东莞 广东东莞市樟木头镇塑胶市场