烟台海山QTZ系列塔吊塔机塔式起重机施工升降机
所属行业 | 起重机 |
厂家/商户所在地 | 山东-烟台 |
公司名 | 烟台海山机械有限公司 |
主营产品 | 塔式起重机,施工升降机,打桩机,塔机配件 |
查看其它工厂 [升降机] 类似产品 查看其它工厂 [混凝土泵] 类似产品 查看其它工厂 [建筑工程机械] 类似产品 |
更多该厂家烟台海山QTZ系列塔吊塔机塔式起重机施工升降机类似产品
QTZ20(T3006)液压自升塔式起重机
> 额定起重力矩200KN.m
> 起重量2t
> 工作幅度30 m
> 起升高度26m
> 起升速度12.5/25m/min
> 回转速度0.7r/min
> 变幅速度22m/min
> 平衡重2.7t
> 塔机自重13t
> 电源380V,50Hz
> 工作温度-20~+40℃
QTZ25(T3008)液压自升塔式起重机
> 额定起重力矩250KN.m
> 起重量2.5t
> 工作幅度30 m
> 起升高度26m
> 附着式高度50m
> 起升速度7/40/60m/min
> 回转速度0.37/0.73r/min
> 变幅速度22m/min
> 平衡重2.7t
> 塔机自重13.9t
> 电源380V,50Hz
> 工作温度-20~+40℃
QTZ315(T3808)(T4207)液压自升塔式起重机
> 公称起重力矩 315 KN.m
> 起重量 3 t
> 工作幅度 38 42 m
> **式高度 27 m
> 附着式高度 100 m
> 起升速度 7/40/60 m/min
> 回转速度 0.37/0.73 r/min
> 变幅速度 22/33 m/min
> 顶升速度 0.6 m/min
> 塔机自重(**式)19.185 21.745 t
> 平衡重 4 5 t
> 工作温度-20~+40℃
QTZ40(T4209)(T4708)液压自升塔式起重机
> 额定起重力矩400KN.m
> 起重量4t
> 工作幅度42 46.8m
> **式高度29m
> 附着式高度120m
> 起升速度7/40/60m/min
> 回转速度0.37/0.73r/min
> 变幅速度22/33m/min
> 顶升速度0.6 m/min
> 平衡重5 6.5 t
> 塔机自重23.5 26.16t
> 电源380V,50Hz
QTZ63(T5013)液压自升塔式起重机
> 额定起重力矩630KN.m
> 起重量6t
> 工作幅度 50 | 45m
> **式高度40m
> 附着式高度140m
> 起升速度7/32/64m/min
> 回转速度0.4/0.6r/min
> 变幅速度20/40m/min
> 顶升速度0.4m/min
> 平衡重 12 | 11t
> 塔机自重42.3t
> 电源380V,50Hz
> 工作温度-12~+40℃
QTZ80(T5613)液压自升塔式起重机
> 公称起重力矩 800 KN.m
> 起重量 6t 8 t
> 工作幅度 56 m
> **式高度 45 m
> 附着式高度 180 m
> 起升速度 7/32/64 0~40/80m/min
> 回转速度 0~0.6 r/min
> 变幅速度 8/27/54 0~42(8/27/54)m/min
> 塔机自重(**式) 61.95 t
> 平衡重 15.55 t
> 工作环境温度 -20~+40℃
QTZ125(TC6015)液压自升塔式起重机
> 公称起重力矩 1250 KN.m
> 起重量 8 t
> 幅度处额定起重量 1.5 t
> 工作幅度 60 m
> **式高度 50 m
> 附着式高度 163 m
> 起升速度2倍率 100 2t m/mi
> 50 4t m/min
> 4倍率 50 4t m/min
> 25 8t m/min
> 回转速度 0~0.6 r/min
> 变幅速度 8.8/29.3/68.6 m/min
> 回转半径 62 m
> 尾部回转半径 17 m
> 结构自重(**式) 48.8 t
> 平衡重 14.5 t
> 整机重(**式) 63.3 t
> 工作风速 20 m/s
> 顶升操作风速(不大于) 13 m/s
> 工作环境温度 -20~+40 ℃
QTZ160(TC6021)液压自升塔式起重机
> 公称起重力矩 1600 KN.m
> 起重量 10 t
> 幅度处额定起重量 2.1 t
> 工作幅度 60 m
> **式高度 59.5 m
> 附着式高度 201 m
> 起升速度2倍率 0~100 m/min
> 4倍率 0~50 m/min
> 回转速度 0~0.6 r/min
> 变幅速度 0~60 m/min
> 回转半径 65 m
> 尾部回转半径 17 m
> 结构自重(**式) 75 t
> 平衡重 22 t
> 整机重(**式) 97 t
> 工作风速 20 m/s
> 顶升操作风速(不大于) 13 m/s
SC200/200施工升降机
> 采用齿轮齿条啮合,外置式,三传动,额定载荷2吨,额定提升高度150米的施工升降机,稍作改动即可成2吨单吊笼施工升降机.本机配有国家专利技术的防坠安全器,坠落时能自动刹车,驱动单元置于笼顶上方,安全**,维修保养方便。本机的提升高度可达300米.本机**用于建筑施工如工业与民用建筑、桥梁施工、井下施工、大型烟囱施工及船舶工业等场所,适用于垂直运输物料及人员,作为性或半性的电梯还可用于仓库、高塔等不同场所
> 技术参数: 形式 齿轮齿条式三驱动双吊笼施工升降机
> 额定载重量 2×2000kg
> 乘客人数 2×24人
> 额定起升速度 34m/min
> 额定提升高度 150m(供货高度50m)
> 吊笼内尺寸(长×宽×高) 3×1.3×2.4m
> 电能耗量 2×3×11(KVA)
> 电机功率 11KW
> 标准节重量 140kg
> 标准节高度 1.508m
> 安全器型号 SAJ30-1.2 50m
> 整机自重 10.56t
HBT系列混凝土输送泵
技术性能及特点:该机系吸收消化国内外**技术而研制成功的新一代泵送机械,获多项国家专利;分配阀装有浮动**环,能自动补偿磨损间隙,出口压力高,高低压全自动切换,只需将一小电器开关一开,即可转换过来;更适用于高层小排量和基础大排量混凝土泵送的频繁转换。
泵送液压系统具有恒功率控制,实行三联泵三回路,因摆阀液压回路装有储能器,在万一停电的情况下,可作备用能源移动“S”管阀以利清洗输送缸。因装有电比例主油泵,可实现排量自动和手动连续调节,并具有自动显示功能,操作方便,故障率极低;因导向轮采用的是液压千斤顶,使用起来更加方便省力。
主油泵采用德国进口博世力士乐公司AIIVLO系列双泵双回路开式三联泵;液压系统主辅阀组采有美国进口阀组;液压系统设计成开式系统,并采用**的全液压换向,系统工作**、换向平稳、效率高、维修简单、费用低。
电气系统电器元件采用原装进口产品:法国施耐德交流接触器;日本三菱公司可编程序控制器(PLC)。工作**,适应性强,远程装置可用于远距离操作。
水洗系统简单,操作方便,能迅速清除输送管中的混凝土;若眼形板和切割环磨损稍大,水洗不动时,可利用泵机上的高压水泵进行洗管,这样可延长眼形板和切割环的使用寿命;因输送缸活塞装有柔性联接器,大大延长了输送缸和活塞的使用寿命,降低了泵送砼的费用。
冷却方式可采用水冷或风冷,由用户选择,风冷却器系德国进口,具有**的制冷性能,在全年气温条件下可保持油温不超过60℃。
使用110KW以上电动机时,可根据用户要求提供法国施耐德软起动装置,改善起动环境
HZS系列混凝土搅拌站
HZS系列混凝土搅拌站是由配料、搅拌、电气控制系统等部分组成的全自动混凝土拌制成套设备,采用意大利SI**A系列或国产JS系列双卧轴强制式主机,具有高精度的微机控制系统,同时配有单独手动控制,具有配比贮存,落差自动补偿,砂石含水率补偿,并配有打印系统,能自动完成预定罐次生产。
本站适用于工业、民用建筑、公路、铁路、桥梁、电力、水利、港口码头、机场等工程的砼施工,可作为商品混凝土的搅拌设备,并可根据不同用户的需用组成各种不同型式、不同规格的组合式砼搅拌站。
各种型号履带式、步履式桩架,并可按用户要求设计制造,该设备均可配置长螺旋钻孔机、振动锤、**锤等作业装置;可完成砼灌注桩、CFG桩、沉管桩、予制桩和地下连续墙等施工。具有安全**、价格低廉、****、作业范围广等优点。用户可根据具体情况选择购置。本厂配套生产各种规格的压注水泥桨及砼的钻孔机、钻杆、钻头等……
以下是120型桩机的主要技术参数:
<<<<型号:履带式JZL120型>>>>
<<<<桩 架 总 高:38m>>>>
<<<<回 转 角 度:360°>>>>
<<<<钻孔直径:Φ1000mm >>>>
<<<<钻孔深度:33m>>>>
<<<<履带 中 心距:6000mm>>>>
<<<<履 带 板 长 :1000mm>>>>
<<<<许用 拔 桩力:800KN>>>>
<<<<配置 动 力头:75KW*2>>>>
<<<<外型尺寸(长*宽):(1200*6200)mm>>>><<<<型号:步履式JZB120型>>>>
<<<<桩 架 总 高:38m>>>>
<<<<回 转 角 度:360°>>>>
<<<<钻孔直径:Φ1000mm >>>>
<<<<钻孔深度:33m>>>>
<<<<轨距:5.5m>>>>
<<<<轮距:4.8m>>>>
<<<<许用 拔 桩力:800KN>>>>
<<<<配置 动 力头:75KW*2>>>>
<<<<外型尺寸(长*宽):(1200*6200)mm>>>>
型号:履带式JZL60型
桩架总高:30.4m
回转角度:360°
钻孔直径:Φ800mm
钻孔深度:25m
履带中心距:4400mm
履带板长:800mm
许用拔桩力:400KN
配置动力头45KW*2(55KW*2)
外型尺寸(长*宽):9785*5140mm
型号:步履式JZL60型
桩架总高:30.4m
回转角度:360°
钻孔直径:Φ800mm
钻孔深度:25m
轨距:4.6m
轮距:4m
许用拔桩力:400KN
配置动力头45KW*2(55KW*2)
外型尺寸(长*宽):9785*5140mm
烟台海山建设机械有限公司、烟台市建筑机械厂长期以来本着"以用户满意为宗旨"的工作指导思想,踏踏实实的朝着“国内**、走向世界”的企
业发展目标迈进。
为了满足客户需求,公司制定了严格的规章制度,并从装配、技术、电气等部门选拔工程师和技工组成强大的售服队伍。
在售前服务方面公司开通多部咨询电话,对来电客户做详细耐心答疑。
售后服务方面公司的**售服队伍和专门售服车辆,随时可以深入全国各地为广大用户提供售后服务。销售的塔机自出厂之日
起即对产品实行**服务,售后服务人员会定期回访用户,将用户的意见和建议及时反馈给公司总部,公司委派专人随时分类整理
各种信息,并制定整改措施,用来改进售后服务工作。同时向全国各地用户做出如下**:“省外报修24小时内到达现场,全年用
户无投诉。”公司全体售服人员凭借“过硬的工作作风和良好的敬业精神以及**的**技术”赢得了广大用户的信赖。
烟台海山建设机械有限公司、烟台市建筑机械厂的售后服务工作以总部管理机构和办事处维修中心为服务网络。
1/总部管理机构以客户服务部负责业务指导及总部日常工作,由销售部具体贯彻实施服务手册 条例,检查办事处,维修中心
日常服务工作业绩。处理客户投诉事宜,搞好各办事处与特约 经销商之间的业务,技术咨询和客户服务过程中的管理工作。
2/办事处维修中心为区域销售、服务为一体的管理网络。实体负责区域内的客户服务工作,并 按服务手册要求做好日常管理
工作,为各用户提供技术咨询,服务指导,对各用户中发现的 一些难题提供技术援助和设备维修。
为确保产品服务质量,售后服务由本公司直接负责,
QTZ160塔式起重机
QTZ125塔式起重机
QTZ80塔式起重机
QTZ63液压自升塔式起重机
QTZ40塔式起重机
QTZ315塔式起重机
QTZ25塔式起重机
QTZ20塔式起重机
SC200/200系列施工升降机
- 联 系 人:谭经理 先生
- 工作 QQ :1731338379
- 电 话: 查看完整电话
- 手 机: 查看完整电话
- 网 址:http://www.hstaji.com
- 地 址:中国 山东 烟台 山东烟台