河南**的儿童充气电瓶车的生产厂家
所属行业 | 玩具小车 |
厂家/商户所在地 | 河南-郑州 |
公司名 | 郑州信泰游乐设备公司 |
主营产品 | 充气电瓶车,充气城堡,充气蹦床,充气攀岩 |
查看其它工厂 [充气玩具] 类似产品 查看其它工厂 [小孩车] 类似产品 查看其它工厂 [车辆玩具] 类似产品 |
更多该厂家河南**的儿童充气电瓶车的生产厂家类似产品
一、充气电瓶车特点:我厂生产的充气电瓶车分为单、双人两种型号,外壳采用高光**的工程塑料材质制成:单人充气电瓶车采用12V直流减速电机;双人充气电瓶车采用24V直流减速电机:并设有快慢挡、倒车、音乐等功能;配置MP3智能控制器,可计时、调速、音乐、数字显示等等功能;轮胎为**、高压**型充气轮胎;底盘为标准方钢结构,承重150KG以上;外罩采用PVC加厚牛津亮光布制成,具有**、鲜艳、美观、易清洗、不退色等特点。我们可以根据客户的要求定做各种款式,只要您能提供款式我们都可以根据您的要求打板设计。
规格:(不含外罩)
单人充气电瓶车尺寸:长120cm 宽63cm高72cm
双人充气电瓶车尺寸:长120cm 宽93cm高72cm
二、配套设置单人车:一块12V36A电瓶、50A充电器一个双人车:两块12V36A电瓶串联成24V、50A充电器一个
三、设备保洁存放
1.做清洁处理,可使用洗衣粉将其污渍、油渍擦去,然后用清水擦洗干净,晒凉干即可。
四、 操作说明:
1.将电源夹子分别夹在电瓶的正负极上(红色正极、蓝色负极),确定夹子接正确之后检查风机位置、工作是否有异样。确定风机工作正常后插入钥匙开启控制器。控制器开启后拔掉钥匙,控制器响起再踩脚踏开关。(注意:确认电源接正确之后,再插入钥匙顺序不能颠倒。如果配置有遥控功能的:需要先按A键启动,然后再按B键关闭才算完成一次操作)
2、电瓶的使用操作因为电瓶车上配备的非干电瓶,客户收到货后需要加入电瓶液才能使用。新电瓶加入电解液后即有一定量的蓄电,先对加液后的新电瓶充满电后才能使用。充电时打开电瓶上加液的螺帽再充12小时后电瓶液有连续的气泡冒出证明电已经充好了。
3.常见故障排查
1)走一会不走了,停一会又走,有音乐不走:电瓶们有电或是音乐盒插头松动。在以上问题可能排除后就是继电器控制开关的问题!双车在行驶过程中建议不要更改12V、24V档位!在行驶中转换档位易损坏转换开关!
2)如果电瓶车不停行驶是继电器损坏或插头部位连线短路造成的。
3)风机有声音是风机叶轮有摩擦声音,调**机位置就可以了!如果这样还不行,就松动风机外边一圈小螺丝,紧三个稍大的靠近风机电机的螺丝!
4)外罩吹不起来。因为外罩在出厂前我们都会检查好才会发货的,首先检查风机的风量是否正常,是否接口连接正常。
5)经常出现爆胎现象,轮胎会受天气变化出现热胀冷缩现象,在温度过高的情况下不要把轮胎的气充的过饱。
6)在车子跑的过程中,速度比较缓慢,电机上的皮带松动了,只要把电机旁边的大螺丝紧一下便可以解决。
7)只能前进或只能够后退检查倒顺开关是否调整正确或倒顺开关是否损坏。
- 联 系 人:王娟 女士
- 工作 QQ :1608805118
- 电 话: 查看完整电话
- 手 机: 查看完整电话
- 网 址:http://www.xintaiyoule.com
- 地 址:中国 河南 郑州 郑州市柴郭工业园