230V46A可调充电机由2012兴中科改版制造
所属行业 | 蓄电池充电器 |
厂家/商户所在地 | 广东-深圳 |
公司名 | 深圳市兴中科电源科技有限公司市场部 |
主营产品 | 出售蓄电池充电机,**生产开关电源,深圳直流电源,上海批发稳压电源 |
查看其它工厂 [充电器] 类似产品 |
更多该厂家230V46A可调充电机由2012兴中科改版制造类似产品
230V46A可调充电机由2012兴中科改版制造
可调充电机产品特点:
1.输出电压连续可调
2. 输出电流连续可调
3.充电电压电流显示
4.可恒流充电,保护电池
5.多重保护措施:过压、欠压、过热、过流、开机缓启动保护
可调充电机使用方法:
1.调节输出电压,一般12V电池均充为14.8V,浮充为13.8V.其他电池请按12V电池进行计算
2.接入电池,注意正负极
3.调节输出电流,限制充电电流,保护电池
4.充电电流随充电电量增加而减小 ,电流越接近0,电池越接近饱和
开关电源型充电机和硅整流充电机相比有什么不同?
1.体积小、重量轻:体积与重量为可控硅整流器1/5-1/10,便于规划、扩建、移动和安装。
2.工作效率高:开关电源由于采用了高频变压器,换效率大大提高,正常情况下较可控硅设备提**率10%以上,负载率达70%以下时较可控硅设备提**率30%以上。
3.技术含量高:核心部件采用国际专利技术产品,控制电路采用专有技术,稳压性能强,提高了工作效率。
4.**性强:**设备安全运行,减少故障发生,保护**,隔离及防腐措施合理。
5.控制精度高:由于系统反应速度快,对于网电及负载变化具有极强的适应性,输出精度可优于1%。开关电源的工作效率高、所以控制精度高,有利于提高产品质量。
6.节电效果好:较可控硅整流器可节电15%-35%,对企业降低成本定会发挥重要作用。
7.灵活性强:输出电压、电流可调,限压、限流可调,大大提高客户使用灵活性。
8.保护功能**:软启动保护,输入交流欠压、过压保护,输出过流、过热保护功能,驱动故障自锁保护功能。
9.保护电池:硅整流充电机是用线圈绕制,输出电压难以控制,输出充电电压较大,容易充坏电池。
- 联 系 人:庄泽燕 女士
- 工作 QQ :1355834123
- 电 话: 查看完整电话
- 手 机: 查看完整电话
- 网 址:http://www.xzkpower.com
- 地 址:中国 广东 深圳 龙岗区龙岗镇龙岗路17号